ADLINK released video/audio capture card HDV62A

21ic News ADLINK released the first video/audio capture card HDV62A that can simultaneously capture high-quality images and digital audio signals. In addition to supporting high-definition digital image input and a variety of analog signals, digital signal source signals can be acquired at the same time. Only one HDV62A video/audio card can be used to complete high-definition video and audio capture detection, which greatly reduces the cost of system construction. . In addition, ADLINK HDV62A video/audio capture card supports Full HD (1920x1080p) images, providing up to 60 uncompressed images per second, while integrating digital audio capture and supporting HDCP digital content encryption, suitable for simultaneous Applications for capturing images and source signals, such as multimedia audio and video device detection and medical image acquisition.

This article refers to the address: http://

1.jpg

ADLINK HDV62A not only supports digital signal DVI and HDMI high-definition images, but also supports a variety of analog image signals on the market, including RGB, NTSC/PAL, S-video and YPbPr, and HDMI and S/PDIF source collection. The ADLINK HDV62A video/audio capture card further supports the HDCP digital content encryption mechanism to be compatible with the detection of multimedia audio and video devices.

"For manufacturers of multimedia audio-visual devices with stable quality such as set-top boxes, Blu-ray players, game consoles, etc., a single HDV62A video/audio capture card can simultaneously acquire uncompressed images and digital audio signals, which can assist the production line in real-time detection. And analysis, can significantly save production line space and the total construction cost of the inspection system." Ling Wen Technology machine vision product manager Chen Wenji said. “In addition, in digital medical imaging applications, ADLINK HDV62A video/audio capture card can capture images in multiple formats, such as RGB, NTSC/PAL, S-video, YPbPr and DVI, especially for medical image information systems. (PACS) is a cost-effective audio and video solution."

ADLINK HDV62A provides a ViewCreator Pro® application that interfaces with graphical operations through simple parameter settings and allows you to perform system tests without writing a program. In addition, ADLINK HDV62A also provides SDK compatible with Microsoft® DirectShow, which shortens the user development cycle and speeds up product introduction. In terms of operating system, ADLINK HDV62A supports Microsoft Windows® 7/Vista/XP and is compatible with the LabVIEW® development language, providing a complete and ready-to-use solution for image vision systems.

Aluminum PCB , it's the PCB that use Aluminum as the base material and very commonly used in LED products and other electronics products since aluminum is the material have high heat dissipation. 

 

PCB = printed circuit board and PCBA = printed circuit board assembly. For PCB, it means the copper circuits be printed on a board, and so the main composition of PCB are copper and board.

 

The copper is the circuits material and the circuits designed by the PCB designers. Depends on the current in the circuits, the PCB copper thickness could be done with 0.5oz-10oz. But the PCB designers need be noted that the copper track width/space need be enlarged with the thickness. For example, the minimum copper track width/space could be 3mil/3mil with 0.5oz, but would be 4mil/4mil with 1oz.

 

The PCB board could be rigid PCB, could be flex PCB and also could be Flex-Rigid PCB. And the materials could be FR4, PI, Aluminum, Copper-based, Rogers, Teflon, etc. They have different applications. For example, FR4 PCB is the most commonly used for rigid PCB and almost good for all electronics products; PI is the most commonly used for flex PCB; Aluminum and copper-based have good thermal diffusivity and always used for LED PCB ; Rogers PCB and Teflon PCB are always used for High Frequency PCB, etc.

 

We are the one-stop shop for all kinds of PCB manufacture service from PCB Prototype to big volume, which could save our customers a lot of time and money.

 


PCB Manufacture Capabilities

 

Features 

 Capabilities

Layers

1-36 layers

Material

 FR-4, Aluminum, Copper, Polyimide, high frequency (Rogers, PTEE, PI), etc.

PCB Type

FR-4 Standard PCB , Aluminum PCB, Copper-based PCB, HDI PCB , Rigid-Flex PCB, Flex PCB, Thick Copper PCB and Rogers PCB, etc.

Board Thickness

0.1mm-6.0mm

Copper Thickness

1/2oz-6oz(18um-210um)

Biggest Board size

600mm*1200mm

Min Tracing/Spacing

0.075mm/0.075mm (3mil/3mil)

Min drilling Hole diameter

0.15mm(6mil), 0.1mm(4mil)-laser drill

Solder Mask

Green, Black, White, Red, Yellow, Blue and Purple, etc.

Silkscreen color

White, Blue, Black, Red, Yellow

Surface finish

HASL Lead free, Immersion Gold (ENIG), Immersion Tin, Immersion Silver, OSP, Carbon oil, etc.

Special Techniques

Impedance Control, Gold Fingers, Blind/Buried vias, Peelable solder mask, Half holes, Via-in-Pad and Countersink hole, etc.


PCB Products Show


PCB Boards


PCB Factory Show


Yifang PCB Factory


Aluminum PCB

Aluminum PCB,Aluminum PCB Prototyping,Aluminum Clad PCB,Aluminum Base PCB

ZhongFeng Electronic Technology Co., Limited , https://www.dopcba.com

This entry was posted in on